Welcome to Ankeri Electronic Commerce (Shanghai) Co., Ltd.
Navigation
Building electrical and mechan
Contact us
Mobile phone
021-69157502
Address: No. 253 Yulu Road, Jiading District, Shanghai
location: Home > english > Product > Building electrical and mechan >
Power distribution cabinet
source:管理员 time:2018-10-20

  1.1, overview

  The power distribution cabinet is mainly used for power distribution and is the final equipment of the power distribution system. The power distribution cabinet is used in places where the load is relatively scattered and the circuit is small. In normal operation, the power distribution cabinet can be switched on or off by means of a manual or automatic switch. In the event of a fault or abnormal operation, the circuit or alarm is switched off with the aid of a protective element. With the help of our instrument, we can measure the parameters such as voltage, current and residual current of the power distribution cabinet.

  1.2, implementation standards

  l GB 7251.12-2013 "Low-voltage switchgear and control equipment Part 1"

  l JB/T3752.1-2013 "Low-voltage switchgear and control equipment product model preparation method"

  l GBT 22764.1-2008 "Low-voltage cabinets - Part 1: General specification"

  l GB50171-2012 "Code for construction and acceptance of electrical installation equipment, cabinets and secondary circuit connection lines"

  l GB 4208-2008 "Shell protection level (IP code)"

  l GB9466.1-1998 "Basic Experimental Methods for Low Voltage Switchgear"

  1.3 Product Features

  1.3.1 The cabinet is assembled by partial welding of cold-rolled steel sheets, featuring light weight and high strength. The cabinet and its components are all galvanized or electrostatically sprayed, and the coating is uniform and beautiful and corrosion resistant;

  1.3.2 According to the installation environment and user needs, design the corresponding cabinet to meet the needs of different users;

  1.3.3 The cabinet can be modularized according to the function, which provides convenience for users to install different modular components and add and modify them.

  1.3.4 The cabinet can be configured with data acquisition function and standard communication interface to realize remote real-time monitoring and computer network management;

  1.4 Power distribution cabinet technical parameters

  Electrical parameters rated voltage UeAC380V/AC220V 50Hz

  Rated current In630A~100A

  Insulation voltage UiAC660V

  Breaking capacity 15KA

  Structural features Protection class IP30 (indoor installation)

  Color RAL7035 (can be customized according to customer requirements)

  Environmental conditions operating temperature -10 ° C ~ 55 ° C

  Storage temperature -25 ° C ~ 65 ° C

  Relative humidity ≤95%, no condensation

  Altitude ≤ 2000m (more than this value for component derating)

  Pollution degree III

  Communication protocol RS485 interface, Modbus-RTU protocol

  1.5.1 Dimensions


 

  1.6 Model Description


 

  1.7 Application areas

  1.7.1 Factory

  The power distribution cabinet acts as a superior device for the power distribution/control box and functions to distribute power to the final power distribution/control box. In the factory, the power distribution cabinet can easily separate the circuits, which facilitates the maintenance and use of the power distribution/control box.

  1.7.2 Hospital

  The hospital has a large number of electrical equipment, so the power distribution cabinet is widely used in hospitals. It is usually installed in the floor distribution room, which is responsible for distributing electric energy to the equipment of each floor. At the same time, its energy measurement, leakage protection and other functions can better ensure the stable operation of the equipment.

  1.7.3 Shopping mall

  In order to meet the safety and comfort requirements of the mall, the mall is equipped with a large number of fans and pump equipment. The power distribution cabinets are installed in various areas of the mall to provide power for each device and to control the on and off of the primary power. Make power management and equipment maintenance more convenient and safe.


Ankeri Electronic Commerce (Shanghai) Co., Ltd.

Consultation hotline:021-69157502  Mobile phone:187-0211-2013

Fax:021-69158302  Address:No. 253 Yulu Road, Jiading District, Shanghai