Welcome to Ankeri Electronic Commerce (Shanghai) Co., Ltd.
Power monitoring and protectio
Contact us
Mobile phone
Address: No. 253 Yulu Road, Jiading District, Shanghai
location: Home > english > Product > Power monitoring and protectio >
ASJ Series Intelligent Power Relay
source:管理员 time:2018-10-23

  1 ASJ series digital measuring relay

  1.1 Overview

  ASJ series digital measuring relay (hereinafter referred to as relay) adopts 32-bit high-performance CPU, real-time sampling three-phase alternating current, three-phase AC voltage signal, and adopts RMS calculation method to achieve higher precision in a wider frequency range. Measurement. Integrated with a variety of protection functions, you can achieve protection input or exit, alarm or trip with simple selection; high precision, low power consumption, fast action, high return coefficient, no jitter, can be used for voltage monitoring (voltage type: Such as generators, transformers and transmission line relay protection, etc. or current monitoring (current type: such as overload of motor, transformer and transmission line and short circuit protection circuit), as overvoltage, undervoltage, overcurrent, Blocking action element or starting element for undercurrent, overfrequency, underfrequency protection.

  1.2 Model Description

  1.3 Technical Specifications

  1.4 Product Features

  1.5 Shape and size (unit: mm)

  1.6 terminal block

  ● Current relay

  ● Voltage relay

  ● Frequency relay

  2 ASJ Series Intelligent Residual Current Relay

  2.1 Overview

  ASJ series residual current action relay can be combined with low voltage circuit breaker or low voltage contactor to form a combined residual current action protector. It is mainly used for TT and TN system distribution lines with AC 50Hz and rated voltage of 400V and below. The electrical circuit is protected against ground faults to prevent equipment and electrical fire accidents caused by ground fault currents, and can also be used to provide indirect contact protection against personal electric shock hazards. The product meets the requirements of the national standard "GB/T 22387-2008".

  2.2 Model Description

  2.3 Technical indicators

  2.4 Product Specifications

  2.5 size and opening (unit: mm)

  Type 10 product

  Type 20 product

  2.6 terminal block

  Note: AL1, AL2 are the relay status when no auxiliary power is added.

  2.7 Accessories (Residual Current Transformer)

  Note: 1. Reserved for larger specifications, can be customized;

  2. If you need a busbar square hole type or an open type transformer, please contact the manufacturer.

Ankeri Electronic Commerce (Shanghai) Co., Ltd.

Consultation hotline:021-69157502  Mobile phone:187-0211-2013

Fax:021-69158302  Address:No. 253 Yulu Road, Jiading District, Shanghai